Brother PT Series manual Entering a symbol, EAN128 and CODE128

The following special characters can only be added to bar codes created using protocols

EAN128 and CODE128.
Symbol	Character	Symbol	Character	Symbol	Character	Symbol	Character
0	(SPACE)	18	<	36	BEL	54	EM
1	!	19	=	37	BS	55	SUB
2	”	20	>	38	HT	56	ESC
3	#	21	?	39	LF	57	{
4	$	22	@	40	VT	58	FS
5	%	23	[	41	FF	59
6	&	24	\	42	CR	60	GS
7	’	25	]	43	SO	61	}
8	(	26	^	44	SI	62	RS
9	)	27	_	45	DLE	63
10	*	28	NUL	46	DC1	64	US
11	+	29		47	DC2	65	DEL
12	,	30	SOH	48	DC3	66	FNC3
13	–	31	STX	49	DC4	67	FNC2
14	.	32	ETX	50	NAK	68	FNC4
15	/	33	EOT	51	SYN	69	FNC1
16	:	34	ENQ	52	ETB
17	;	35	ACK	53	CAN

Entering a symbol

There are 147 symbols and pictures available with the Symbol function.

1Press s. The last category used is displayed.

2Press u or d to select the desired category.

3Press l or r until the desired symbol is selected.

4Add the symbol(s) to the text.

•To add a single symbol or the last one in a series, skip to step 6.

•To add a series of symbols to the text, press g, then n.

5For each additional symbol, repeat steps 2through 4.

20