Setting Label Attributes
Using the Label key, you can create a label with a frame around the text and specify the label length and tab length. (Cut Options which may be needed when printing a label can also be set by using the Label key. Refer to “Tape Cutting Options” on page 57.)
1Press the Label key.
The current settings are displayed.
z EDITING A LABEL
2Select an attribute using the or key, and then set a value for that attribute using the or key.
• When setting the tab length, hold down the or key to change the value faster.
•When setting the label length, refer to “Adjusting the Label Length” on page 59
3Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
1
2
3
4
5
6
7
8
9
Setting Label Attributes
35 |