LABEL PRINTING
• Press the Escape key to return to the previous step.
• The tape is automatically cut after each copy is printed. Refer to “Tape Cutting Options” on page 57 to change this setting.
•The figures shown on the screen during printing indicate the “count / number of copies”.
•Pressing the Space key when selecting the number of copies resets the value to 1, the default.
•
•The
•Only one
•Any symbols or other
•An
•Letters and numbers increase as shown below:
0 | Î 1 | ...9 | Î 0 | Î ... |
A | Î B | ...Z | Î A | Î ... |
aÎ b ...z Î a Î ...
A0 Î A1 ...A9 Î B0 Î ...
Spaces (shown as underscores “_” in the example below) can be used to adjust the spacing between characters or to control the number of digits that are printed.
_9 | Î 10 | ...99 Î 00 Î ... |
_Z | Î AA | ...ZZ Î AA Î ... |
1_9 | Î 2_0 | ...9_9Î 0_0 Î ... |
Mirror Printing
Using the mirror printing function you can create labels with the text printed in reverse so that they can be read from the opposite side when attached to glass or other transparent material.
1Make sure that the appropriate tape cassette is inserted and ready for printing.
2Hold down the Shift key and press the Print key to display the print options screen, and then select “Mirror” using the or key.
3
4
Press the OK or Enter key. The message “Mirror Print?” is displayed.
Press the OK or Enter key. "Printing...Copies" is displayed while the labels are being printed.
•Press the Escape key to return to the previous step.
•Text should be printed on clear tape when using the mirror printing function.
•The copy and
56 |
Printing a Label