Tape Cutting Options
The tape cutting options allow you to specify how the tape is fed and cut when printing labels. In particular, the “Chain” and “No Cut” options greatly reduce the amount of wasted tape by using smaller margins and eliminating blank sections cut between labels.
1Press the Label key to display the Label menu.
2Select "Cut Option" using the 
or 
key, and then set the value by using the 
or 
key.
3Press the OK or Enter key to apply the settings.
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Escape key to return to the previous step.
• Refer to the Tape Cutting table for a list of all available settings.
z LABEL PRINTING
1
2
3
4
5
6
7
8
9
Tape Cutting Options
57 |