Panasonic KX-FL501AL, KX-FL501NZ manual Important information for Australian users, Installation

Page 4

Important information (for Australian users)!

Instructions to customer

Installation

Attached to this apparatus is an approval label. This label is evidence that it is a “PermittedAttachment” which has been authorised to be connected to your telephone service.

Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows:

1.Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)

2.Remove screw “B” and withdraw the plug. (See Fig. 2.)

3.Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.)

4.Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET PLUG

SCREW “A”

Fig. 1

SCREW

“B”

Fig. 2

TELEPHONE CORD

)

 

Connect to the PLUG

 

( as shown in Fig. 1.

SCREW “A”

SCREW

 

SOCKET

“B”

 

Fig. 3Fig. 4

If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed.

You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed.

Should the Permitted Attachment not operate when plugged into a socket, it is either faulty or unsuitable for operation with your telephone service. It should be returned to the store where purchased.

Service difficulties

If at any time a fault occurs on your telephone service carry out the following checks before you call for service:

●Disconnect the Permitted Attachment and try using the service with the normal telephone.

●If the telephone service then operates satisfactorily, the fault is in your Permitted Attachment. Leave the Permitted Attachment disconnected and report the fault to its supplier or agent to arrange for repair.

●If when using the telephone the service is still faulty, report the fault to “Service Difficulties and Faults” for attention.

You are required to keep this Permitted Attachment in good working order while it is connected to your telephone service. Its construction or internal circuit must not be modified in any way without permission.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents KX-FL501NZ Thank you for purchasing a Panasonic facsimile For your future referenceFor Australian users Service difficulties InstallationImportant information for Australian users Safety instructions Important safety instructionsLaser radiation Fuser unitToner cartridge Drum unitOther Information Table of Contents Copy Accessories Included accessoriesAccessory information Model No Usage SpecificationsHelp Button Help functionHelp Easy DialFinding the Controls OverviewDocument guides Handset Speaker Paper tray Left side of the unitLocation ONE-TOUCH DialToner cartridge and drum unit SetupSurface Toner save feature Paper tray, document stacker and paper stacker Paper trayDocument stacker Paper stackerRecording paper Adding paperKX-FL501AL users Connect to Line ConnectionsKX-FL501NZ users To the single Setting the date and time Date and time, your logo and facsimile telephone numberMenu Menu Easy Dial SET StopMenu Recall Easy Dial SET Setting your logoHandset Mute To select characters with the dial keypad To select characters using Easy DialDisplay order of characters Setting your facsimile telephone number To correct a mistake To delete a numberVolumes Adjusting volumesRinger volume Handset receiver volumeAutomatic Dialling Storing names and telephone numbers in ONE-TOUCH DialRecall Directory ProgramStoring names and telephone numbers in Easy Dial Editing and erasing a stored name and number Editing a stored name and numberErasing a stored station and item Easy Dial SET Directory Program StopMaking a voice call using ONE-TOUCH Dial and Easy Dial Using ONE-TOUCH DialUsing Easy Dial Lower Dial NAME/TEL NO. Stop MonitorCaller ID Caller ID service from your phone companyHow Caller ID is displayed Viewing and calling back using caller information Caller ID SearchMonitor NAME/TEL no Display while viewingConfirming caller information using the Caller ID list Printing and erasing the Caller ID listSample of a Caller ID list Caller ID Print Stop SETFor Easy Dial Rotate Easy Dial Storing caller information in ONE-TOUCH Dial and Easy DialEasy Dial Lower SET Caller ID Search Voice Contact Initiating voice contactReceiving a request for voice contact Press MonitorResolution Sending FaxesSending a fax manually FAX StartSending a fax using ONE-TOUCH Dial Easy Dial Stop Resolution Lower ONE-TOUCH Dial FAX StartEffective scanning area Document weight Documents you can sendMinimum size Maximum sizeReports for confirmation Sending reportJournal report Sample of a sending reportBroadcast transmission Programming the stationsManual Broad Broadcast ONE-TOUCHAdding a new station Easy Dial SET Directory ProgramErasing a stored station Sending the same document to pre-programmed parties Easy Dial Stop Resolution FAX Start SETManual Broad Broadcast Setting the unit to receive faxes Receiving FaxesWith a PC Remote Fax activationTEL mode Answering all calls manually Activating TEL modeReceiving a fax manually Stop FAX StartFAX only mode All calls are received as faxes Activating FAX only modeUsing the unit with an answering machine Setting up the fax machine and an answering machineHow the fax machine and answering machine work Receiving a voice message and fax document in one callReceiving voice calls Receiving fax callsTEL/FAX delayed ring count Voice call To set TEL/FAX modeCall is received Silent fax recognition ring countWhen an extension telephone is connected TEL/FAX delayed ring countUsing with an answering machine and computer Extension telephoneTurning the Auto Answer mode on remotely To switch to the FAX only modeTo switch to the TEL/FAX mode Menu SETDistinctive ring service Setting the ring pattern detectionPager call when the unit receives a fax When your pager receives a pager callDisplay Menu Monitor Easy Dial SET REDIAL/PAUSETo select the resolution according to the type of document Copy Start Stop Collate Resolution Copy ZoomCopying Making a copyTo reduce or enlarge a document To collate multiple copiesProgramming Features SummaryGeneral programming method Basic features ErrorProgramming table OFFHow to set menu options Tone#13 BellAdvanced features #22#23 #25Normal #44 #46#49 #58FAX only Communication message Error Cause & solution Code Error MessagesReports Display message Cause & solution DisplayError Messages Operations Problem Cause & solution Other party complains that Problem Cause & solution Cannot receive documentsLetters on their received Document are distorted or notProblem Cause & solution Cannot select the desired Receive modeProblem Cause & solution Auto Answer to turn onIf a power failure occurs Replacement Replacing the toner cartridge and the drum unitFuser unit gets hot Do not touch itGreen drum surface Jams When the recording paper has jammed in the unitRecording paper jam When the recording paper was not fed into the unit properly Document jams sending No feeding or multiple feeding occurs while sending Cleaning Cleaning the inside of the unitRemove the drum and toner unit by Reference lists and reports Printed ReportsEasy Dial SET Stop Technical data about this product Specifications Toner lifeDrum life Toner life for KX-FA76AIndex IndexIndex Page PFQX1502ZA WM0101NK0
Top Page Image Contents