Getting Started
Setting the Dial Mode*
Your machine must be set to the dialing mode compatible with your telephone line requirements. The Dial Modes supported are tone and pulse. Pulse is sometimes referred to as rotary dial.
If your machine is connected to a PBX system, you may need to enter a number to access the outside telephone line.
To set the Dial Mode:
1. Press:
Menu
***
Dial mode
1.Tone
2.Pulse
2.Select the Dial Mode.
To select tone, press 
.
To select pulse, press |
| . |
|
|
|
Note: If you have the 2nd line hardware installed, you will be prompted to select the Dial Mode for Line 2.
3.
Enter outside number
Call number (10 max):
The menu selection screen redisplays. Press Exit or Stop to return to the Standby Mode.*
*This feature not allowed in all markets.
***Please refer to your Menu Map.
WorkCentre Pro 665/685/765/785 |