D-Link DP-802 manual Desktop / Shelf Installation, One lpr User’s Guide

Page 24

Internet/Print Server User’s Guide

♦Wall mount hardware

♦This User’s Guide

♦One lpr software diskette

♦One lpr User’s Guide

Inspect the device and all accompanying items. If any item is dam- aged or missing, report the problem to your dealer immediately.

Desktop / Shelf Installation

The unit has rubber feet attached to the bottom to cushion it. Allow enough ventilation space between the device and the objects around it. Choose a sturdy, level surface in a ventilated area that is dust free and away from heat vents, warm air exhaust from other devices and direct sunlight. Avoid proximity to large electric motors or other electromagnetic equipment.

Observe the following guidelines when choosing an installation loca- tion:

∙Air temperature should range from 32° to 122° F (0° to 50° C).

∙Humidity should be less than 90%, non-condensing.

∙Site should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength.

For a detailed list of the product’s technical specifications, refer to Appendix B, Specifications.

12	Installation

Image 24

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting StartedQuick Installation Configuration Mandatory Settings for Internet Access Introduction About This GuideAudience Overview of the User’s GuideIntroduction Product Features Product DescriptionInternet Server Technology Non-Internet Implementations Introduction Installation UnpackingDesktop / Shelf Installation One lpr User’s GuideWall Installation Port DescriptionLED Description Serial WANParallel Printer RJ-45 LANPw/Tx Link/RxConnecting to the Local Network Normal LED Flash PatternLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Setting IP Addresses Using the Default AddressDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration Default Value Must Be User Modified? Yes DNS IP AddressISP Account Phone Number Default Value none Must Be User Modified? Yes Default Value noneISP Account User ID ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice∙ DNS Domain Name Service an IP address provided by your ISP OperationPrint Server Setup Print Server FeaturesConnecting the Print Server NetBEUIAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Configuration Settings Navigation ControlsSystem Configuration Default Value Must Be User Modified? NoServer Name Local LAN IP AddressDefault Value Local LAN Subnet MaskOperation Mode Default Value 30 minutes Must Be User Modified? NoMaximum Idle Time Options sub-menusChange Password WAN Port Configuration Default Value DialupDefault Value 115200 bps Line TypeISP Account User ID Modem AT Commands Options sub-settingsDial Prefix String Atdt default ISP Account IP AddressPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port Speed Parallel Port PJL PrinterNetBEUI Workgroup Name Default Value LaserWriter Default Value LevelNetBEUI Maximum Connected Sta- tions AppleTalk Printer TypeDhcp Server Configuration Default Value StandardAppleTalk Font Group Enable Options Yes/No Default Value YesIP Address Range Start Default Value 1440 24 hours IP Address Range EndIP Lease Time IP Reserve TableServer Address Configuration Local IP AddressProtocol Advanced Control Configuration Manager Server IP AddressLog and Filter Dial-up ScheduleHoliday Table Routing Table Filter NetBIOS over TCP/IP Display InformationDisplaying Information Tools Dhcp Server StatusSave Configuration Troubleshooting DP-802 LED Post Error Indication TableSystem Post Device Installation Problems WANStation Configuration Problems Print ServerOperating Problems Page Specifications GeneralEnvironmental and Physical Modem AT Commands Basic AT Command SetModem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var DescriptionModem AT Commands Port Pinouts Serial PortParallel Port RJ-45 PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Glossary 100Mbps10Mbps AddressBandwidth Category 3, 4Collision Collision DomainEthernet Fast EthernetHub In-bandLeased-Line MbpsTelnet Twisted-pair UTP/STPIndex AppleTalkPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card