D-Link DP-802 manual Print Server Configuration

Page 46

Internet/Print Server User’s Guide

3.Confirm that your network is operating normally.

4.Connect the internet/print server to the network (through the RJ-45 port on the print server’s rear panel).

5.While the printer is powered off, install a printer cable to con- nect its parallel port to the printer port of the internet/print server.

6.Switch printer power on.

7.Plug the AC power adapter’s output plug into the power input socket on the rear panel of the internet/print server.

8.Plug the AC power adapter into an electric service outlet. This will supply power to the internet/print server. (The server has no power switch).

Connecting a Printer

Print Server Configuration

Print server configuration and operation is controlled through the same Telnet console or browser interface as the WAN port and other

34	Print Server Setup

Image 46

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting StartedQuick Installation Configuration Mandatory Settings for Internet Access Audience IntroductionAbout This Guide Overview of the User’s GuideIntroduction Product Features Product DescriptionInternet Server Technology Non-Internet Implementations Introduction Installation UnpackingDesktop / Shelf Installation One lpr User’s GuideWall Installation Port DescriptionParallel Printer LED DescriptionSerial WAN RJ-45 LANPw/Tx Link/RxConnecting to the Local Network Normal LED Flash PatternLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Setting IP Addresses Using the Default AddressDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice ∙ DNS Domain Name Service an IP address provided by your ISP OperationPrint Server Setup Print Server FeaturesNetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Configuration Settings Navigation ControlsServer Name System ConfigurationDefault Value Must Be User Modified? No Local LAN IP AddressDefault Value Local LAN Subnet MaskMaximum Idle Time Operation ModeDefault Value 30 minutes Must Be User Modified? No Options sub-menusChange Password Default Value 115200 bps WAN Port ConfigurationDefault Value Dialup Line TypeISP Account User ID Dial Prefix String Atdt default Modem AT CommandsOptions sub-settings ISP Account IP AddressPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name NetBEUI Maximum Connected Sta- tions Default Value LaserWriterDefault Value Level AppleTalk Printer TypeDefault Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start IP Lease Time Default Value 1440 24 hoursIP Address Range End IP Reserve TableServer Address Configuration Local IP AddressProtocol Log and Filter Advanced Control ConfigurationManager Server IP Address Dial-up ScheduleHoliday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Tools Dhcp Server StatusSave Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post Device Installation Problems WANStation Configuration Problems Print ServerOperating Problems Page Specifications GeneralEnvironmental and Physical Modem AT Commands Basic AT Command SetModem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var DescriptionModem AT Commands Port Pinouts Serial PortParallel Port RJ-45 PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration 10Mbps Glossary100Mbps AddressCollision BandwidthCategory 3, 4 Collision DomainHub EthernetFast Ethernet In-bandMbps Leased-LineTelnet Twisted-pair UTP/STPIndex AppleTalkPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card