D-Link DP-802 manual Operating Problems

Page 75

Operating Problems

ISP LOGIN PROCEDURES – LOGIN SCRIPT: It may be neces- sary for you to create login script entries in order to complete your login procedure. Some ISPs prompt for a communications protocol choice or other data after a successful modem connec- tion. Refer to Chapter 5 for more information.

MODEM COMMANDS: It may be necessary for you to reconfigure the initial modem commands due to operational differences in your modem. Refer to Appendix C of this User’s Guide and the documentation provided with your modem for more information. In particular, check the setting of the initial string for discrep- ancies with your modem’s operational features.

ISP DETAILS: Double check all ISP login information (i.e., user- name, password, phone number) for accuracy.

OUTSIDE LINE ACCESS DIALING: If it is necessary for you to dial a special number in order to dial a phone number outside of your office, that dialing information will need to be included in the phone number information provided to the internet/print server. See Chapters 3 and 5 for more information.

NUMBER OF USERS: While the internet/print server can handle any number of users, it is recommended that no more than 50 attempt to access the internet through the device simultane- ously. Note that the more people who access the internet through the internet/print server the slower response times will be for all.

Troubleshooting

63

Image 75
Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Getting Started Quick InstallationQuick Installation Configuration Mandatory Settings for Internet Access Overview of the User’s Guide IntroductionAbout This Guide AudienceIntroduction Product Description Product FeaturesInternet Server Technology Non-Internet Implementations Introduction Unpacking InstallationOne lpr User’s Guide Desktop / Shelf InstallationPort Description Wall InstallationRJ-45 LAN LED DescriptionSerial WAN Parallel PrinterLink/Rx Pw/TxNormal LED Flash Pattern Connecting to the Local NetworkLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Using the Default Address Setting IP AddressesDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration Default Value Must Be User Modified? Yes DNS IP AddressISP Account Phone Number Default Value none Must Be User Modified? Yes Default Value noneISP Account User ID ISP Account Password Prompt Keyin Username Stepanka Password Abcd Choice Login ScriptOperation ∙ DNS Domain Name Service an IP address provided by your ISPPrint Server Features Print Server SetupConnecting the Print Server NetBEUIAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Navigation Controls Configuration SettingsLocal LAN IP Address System ConfigurationDefault Value Must Be User Modified? No Server NameLocal LAN Subnet Mask Default ValueOptions sub-menus Operation ModeDefault Value 30 minutes Must Be User Modified? No Maximum Idle TimeChange Password Line Type WAN Port ConfigurationDefault Value Dialup Default Value 115200 bpsISP Account User ID ISP Account IP Address Modem AT CommandsOptions sub-settings Dial Prefix String Atdt defaultPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port Speed Parallel Port PJL PrinterNetBEUI Workgroup Name AppleTalk Printer Type Default Value LaserWriterDefault Value Level NetBEUI Maximum Connected Sta- tionsDhcp Server Configuration Default Value StandardAppleTalk Font Group Enable Options Yes/No Default Value YesIP Address Range Start IP Reserve Table Default Value 1440 24 hoursIP Address Range End IP Lease TimeLocal IP Address Server Address ConfigurationProtocol Dial-up Schedule Advanced Control ConfigurationManager Server IP Address Log and FilterHoliday Table Routing Table Filter NetBIOS over TCP/IP Display InformationDisplaying Information Dhcp Server Status ToolsSave Configuration Troubleshooting DP-802 LED Post Error Indication Table System Post WAN Device Installation ProblemsPrint Server Station Configuration ProblemsOperating Problems Page General SpecificationsEnvironmental and Physical Basic AT Command Set Modem AT CommandsModem AT Commands Hook Switch Sn? Command Var Description Extended AT& Command SetModem AT Commands Serial Port Port PinoutsRJ-45 Port Parallel PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Address Glossary100Mbps 10MbpsCollision Domain BandwidthCategory 3, 4 CollisionIn-band EthernetFast Ethernet HubLeased-Line MbpsTelnet UTP/STP Twisted-pairAppleTalk IndexPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card