D-Link DP-802 manual Using a Browser to Configure the Server

Page 37

Note:	When using	Telnet	to modify	device pa-
	rameters,	saving	those	parameters
	immediately ends the Telnet session.

Using a Browser to Configure the Server

Once your PC is configured with an IP address on the same subnet as the server, start your browser program and enter the “http://” prefix, followed by the IP address assigned to the server, in the ad- dress window.

Internet Server Setup

25

Image 37

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Getting Started Quick InstallationQuick Installation Configuration Mandatory Settings for Internet Access About This Guide IntroductionAudience Overview of the User’s GuideIntroduction Product Description Product FeaturesInternet Server Technology Non-Internet Implementations Introduction Unpacking InstallationOne lpr User’s Guide Desktop / Shelf InstallationPort Description Wall InstallationSerial WAN LED DescriptionParallel Printer RJ-45 LANLink/Rx Pw/TxNormal LED Flash Pattern Connecting to the Local NetworkLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Using the Default Address Setting IP AddressesDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Prompt Keyin Username Stepanka Password Abcd Choice Login ScriptOperation ∙ DNS Domain Name Service an IP address provided by your ISPPrint Server Features Print Server SetupNetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Navigation Controls Configuration SettingsDefault Value Must Be User Modified? No System ConfigurationServer Name Local LAN IP AddressLocal LAN Subnet Mask Default ValueDefault Value 30 minutes Must Be User Modified? No Operation ModeMaximum Idle Time Options sub-menusChange Password Default Value Dialup WAN Port ConfigurationDefault Value 115200 bps Line TypeISP Account User ID Options sub-settings Modem AT CommandsDial Prefix String Atdt default ISP Account IP AddressPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name Default Value Level Default Value LaserWriterNetBEUI Maximum Connected Sta- tions AppleTalk Printer TypeDefault Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start IP Address Range End Default Value 1440 24 hoursIP Lease Time IP Reserve TableLocal IP Address Server Address ConfigurationProtocol Manager Server IP Address Advanced Control ConfigurationLog and Filter Dial-up ScheduleHoliday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Dhcp Server Status ToolsSave Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post WAN Device Installation ProblemsPrint Server Station Configuration ProblemsOperating Problems Page General SpecificationsEnvironmental and Physical Basic AT Command Set Modem AT CommandsModem AT Commands Hook Switch Sn? Command Var Description Extended AT& Command SetModem AT Commands Serial Port Port PinoutsRJ-45 Port Parallel PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration 100Mbps Glossary10Mbps AddressCategory 3, 4 BandwidthCollision Collision DomainFast Ethernet EthernetHub In-bandMbps Leased-LineTelnet UTP/STP Twisted-pairAppleTalk IndexPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card