D-Link DP-802 manual ISP Account User ID

Page 55

Description: The phone number entered in this setting is the number the internet/print server will dial to establish its internet (WAN) connection.

Note:	If the ISP phone line is busy, the inter-
	net/print server will automatically redial.
	Three successive redial attempts will be
	made.

ISP Account -> User ID

Options: For dial-up connections, the ISP assigned user ID name exactly as provided (i.e., all letters capitalized where necessary, underscores and other punctuation included). The maximum length is 64 characters.

Default Value: (none)

Description: This setting is the user ID that will be pro- vided to the ISP once the modem connection is established.

ISP Account -> Password

Options: For dial-up connections, the ISP user access pass- word exactly as provided (i.e., all letters capitalized where necessary, underscores and other punctuation included). The maximum length is 32 characters.

Default Value: (none)

Description: This setting is the user password that will be provided to the ISP once the modem connection is established and the username has been accepted.

Configuration Settings

43

Image 55

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Getting Started Quick InstallationQuick Installation Configuration Mandatory Settings for Internet Access Overview of the User’s Guide IntroductionAbout This Guide AudienceIntroduction Product Description Product FeaturesInternet Server Technology Non-Internet Implementations Introduction Unpacking InstallationOne lpr User’s Guide Desktop / Shelf InstallationPort Description Wall InstallationRJ-45 LAN LED DescriptionSerial WAN Parallel PrinterLink/Rx Pw/TxNormal LED Flash Pattern Connecting to the Local NetworkLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Using the Default Address Setting IP AddressesDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Prompt Keyin Username Stepanka Password Abcd Choice Login ScriptOperation ∙ DNS Domain Name Service an IP address provided by your ISPPrint Server Features Print Server SetupNetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Navigation Controls Configuration SettingsLocal LAN IP Address System ConfigurationDefault Value Must Be User Modified? No Server NameLocal LAN Subnet Mask Default ValueOptions sub-menus Operation ModeDefault Value 30 minutes Must Be User Modified? No Maximum Idle TimeChange Password Line Type WAN Port ConfigurationDefault Value Dialup Default Value 115200 bpsISP Account User ID ISP Account IP Address Modem AT CommandsOptions sub-settings Dial Prefix String Atdt defaultPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name AppleTalk Printer Type Default Value LaserWriterDefault Value Level NetBEUI Maximum Connected Sta- tionsDefault Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start IP Reserve Table Default Value 1440 24 hoursIP Address Range End IP Lease TimeLocal IP Address Server Address ConfigurationProtocol Dial-up Schedule Advanced Control ConfigurationManager Server IP Address Log and FilterHoliday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Dhcp Server Status ToolsSave Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post WAN Device Installation ProblemsPrint Server Station Configuration ProblemsOperating Problems Page General SpecificationsEnvironmental and Physical Basic AT Command Set Modem AT CommandsModem AT Commands Hook Switch Sn? Command Var Description Extended AT& Command SetModem AT Commands Serial Port Port PinoutsRJ-45 Port Parallel PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Address Glossary100Mbps 10MbpsCollision Domain BandwidthCategory 3, 4 CollisionIn-band EthernetFast Ethernet HubMbps Leased-LineTelnet UTP/STP Twisted-pairAppleTalk IndexPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card