Description: A login script is used to provide login prompt responses when required by the ISP login procedures. Each line item in the script table should correspond with a prompt that the ISP makes once the modem connection is established. The prompt string information entered in the table should in- clude an indication of what data is being asked for at each step in the login process. Reply string data should be provided ex- actly as it would be if it were hand entered.
Operation
To access the internet, do the following at each station that will use the internet/print server for internet access:
1.Make sure that TCP/IP settings are configured properly. IP pa- rameters that must be set include:
∙IP Address – must be a unique IP address chosen from the three reserved IP ranges set aside for local network only use. See “Setting IP Addresses” earlier in this chapter.
∙Default Gateway – should be set to the IP address assigned to the internet/print server’s LAN interface.
∙DNS (Domain Name Service) – an IP address provided by your ISP.
2.Activate your browser and use normally.
Internet Server Setup | 31 |