D-Link DP-802 manual Connecting to the Local Network, Normal LED Flash Pattern

Page 28

Internet/Print Server User’s Guide

LPT

The LPT port LED lights to indicate when data is being sent to the network printer it is connected to. If no data is being transmitted, the LPT LED will be off.

Normal LED Flash Pattern

Immediately after power-up, all four of the LEDs should display steady green for several seconds. Then the COM LED and LPT LED should flash simultaneously three times. This sequence of flashes should be followed by first the COM LED flashing once and then LPT LED flashing once, repeated three times in succession. If as prob- lem with the device is detected during this time, the LED flashes will display an error pattern (see Appendix A: Troubleshooting for more information on POST error indications). If no errors are detected, the internet server will begin operating normally.

Connecting to the Local Network

The internet/print server includes one RJ-45 NWay LAN port. To connect the device to your LAN, use a standard Category 3, 4, 5 UTP, or STP twisted-pair cable to link the device to an Ethernet or Fast Ethernet hub or switch.

Cable length limits must conform to Ethernet and Fast Ethernet wiring rules. Ethernet cable segments can be a maximum of 100 meters. Fast Ethernet wiring rules also limit the maximum length of cabling segments to 100 meters.

Once the internet/print server is physically connected to a local network and you have used the IS Admin software included to as- sign an IP address to the device (or simply reconfigured your

16	Installation

Image 28

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting StartedQuick Installation Configuration Mandatory Settings for Internet Access Introduction About This GuideAudience Overview of the User’s GuideIntroduction Product Features Product DescriptionInternet Server Technology Non-Internet Implementations Introduction Installation UnpackingDesktop / Shelf Installation One lpr User’s GuideWall Installation Port DescriptionLED Description Serial WANParallel Printer RJ-45 LANPw/Tx Link/RxConnecting to the Local Network Normal LED Flash PatternLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Setting IP Addresses Using the Default AddressDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice∙ DNS Domain Name Service an IP address provided by your ISP OperationPrint Server Setup Print Server FeaturesNetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Configuration Settings Navigation ControlsSystem Configuration Default Value Must Be User Modified? NoServer Name Local LAN IP AddressDefault Value Local LAN Subnet MaskOperation Mode Default Value 30 minutes Must Be User Modified? NoMaximum Idle Time Options sub-menusChange Password WAN Port Configuration Default Value DialupDefault Value 115200 bps Line TypeISP Account User ID Modem AT Commands Options sub-settingsDial Prefix String Atdt default ISP Account IP AddressPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name Default Value LaserWriter Default Value LevelNetBEUI Maximum Connected Sta- tions AppleTalk Printer TypeDefault Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start Default Value 1440 24 hours IP Address Range EndIP Lease Time IP Reserve TableServer Address Configuration Local IP AddressProtocol Advanced Control Configuration Manager Server IP AddressLog and Filter Dial-up ScheduleHoliday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Tools Dhcp Server StatusSave Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post Device Installation Problems WANStation Configuration Problems Print ServerOperating Problems Page Specifications GeneralEnvironmental and Physical Modem AT Commands Basic AT Command SetModem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var DescriptionModem AT Commands Port Pinouts Serial PortParallel Port RJ-45 PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Glossary 100Mbps10Mbps AddressBandwidth Category 3, 4Collision Collision DomainEthernet Fast EthernetHub In-bandMbps Leased-LineTelnet Twisted-pair UTP/STPIndex AppleTalkPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card