D-Link DP-802 manual Print Server Configuration, Parallel Port Port Name

Page 58

Internet/Print Server User’s Guide

Description: A login script is used to provide login prompt responses when required by the ISP login procedures. Each line item in the script table should correspond with a prompt that the ISP makes once the modem connection is established. The prompt string information entered in the table should in- clude an indication of what data is being asked for at each step in the login process. Reply string data should be provided ex- actly as it would be if it were hand entered.

Print Server Configuration

The settings listed here are those available for print server control. Refer to Chapter 4 for more information about setting-up and using the print server functions of the internet/print server.

Parallel Port -> Port Name

Options: A string of letters and numbers up to 32 characters long.

Default Value: IS-xxxxxx-P1 (where “xxxxxx” is the last six digits of the device’s MAC address).

Description: An identifying label for the print server port.

Important: If the port will be used for Windows NT 4.0 clients, the port name cannot exceed 12 characters. If the port will be used for LAN manager clients, the port name cannot ex- ceed eight characters.

46	Configuration Settings

Image 58

Contents DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting StartedQuick Installation Configuration Mandatory Settings for Internet Access Audience IntroductionAbout This Guide Overview of the User’s GuideIntroduction Product Features Product DescriptionInternet Server Technology Non-Internet Implementations Introduction Installation UnpackingDesktop / Shelf Installation One lpr User’s GuideWall Installation Port DescriptionParallel Printer LED DescriptionSerial WAN RJ-45 LANPw/Tx Link/RxConnecting to the Local Network Normal LED Flash PatternLAN Connection Connecting to the Internet Connecting Power Connecting PowerInternet Server Setup Setting IP Addresses Using the Default AddressDefault Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice∙ DNS Domain Name Service an IP address provided by your ISP OperationPrint Server Setup Print Server FeaturesNetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Configuration Settings Navigation ControlsServer Name System ConfigurationDefault Value Must Be User Modified? No Local LAN IP AddressDefault Value Local LAN Subnet MaskMaximum Idle Time Operation ModeDefault Value 30 minutes Must Be User Modified? No Options sub-menusChange Password Default Value 115200 bps WAN Port ConfigurationDefault Value Dialup Line TypeISP Account User ID Dial Prefix String Atdt default Modem AT CommandsOptions sub-settings ISP Account IP AddressPrompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name NetBEUI Maximum Connected Sta- tions Default Value LaserWriterDefault Value Level AppleTalk Printer TypeDefault Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start IP Lease Time Default Value 1440 24 hoursIP Address Range End IP Reserve TableServer Address Configuration Local IP AddressProtocol Log and Filter Advanced Control ConfigurationManager Server IP Address Dial-up ScheduleHoliday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Tools Dhcp Server StatusSave Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post Device Installation Problems WANStation Configuration Problems Print ServerOperating Problems Page Specifications GeneralEnvironmental and Physical Modem AT Commands Basic AT Command SetModem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var DescriptionModem AT Commands Port Pinouts Serial PortParallel Port RJ-45 PortPort Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration 10Mbps Glossary100Mbps AddressCollision BandwidthCategory 3, 4 Collision DomainHub EthernetFast Ethernet In-bandMbps Leased-LineTelnet Twisted-pair UTP/STPIndex AppleTalkPinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card