![](/images/new-backgrounds/1033980/3398011x1.webp)
Quad Amp Hardware Reference Manual
Quad Amp Basic Specifications
Physical Specifications
Size (See Figure 1)
•Height: 22.0 Inches
•Width: 10.5 Inches
•Length:
5.125 Inches (without mounting option)
9.031 Inches (with mounting option)
Weight
•60 lb. (27.3 kg)
Temperature
Storage:
Operating: 0 degrees C to +60 degrees C (Unit is disabled if heat sink temperature exceeds 80 degrees C)
Relative Humidity
10% to 95%,
Electrical Specifications
Switching Frequency
7.5kHz (Nominal)
15 kHz (Maximum)
Cooling
Options 3B, 4, and 4A: Forced Air (Internal)
Options 3 and 3A: Customer supplied (external)
Protection
Fuses:
F201 - Shunt Regulator IGBT and Shunt Resistors
F202 - Logic Power Supply
Bus Supply, Control Supply and Shunt Specifications
120V/208V/230V Quad Amplifier Specifications
Main AC Input Voltage/Current (L1, L2, L3) Input voltage
Input current/phase, continuous.
Frequency
Control AC Input Voltage/Current (Connector C3)
(Dependent on Option Ordered) Input voltage (Selectable)
Min. required input current (RMS)
Frequency
120 | VAC, single phase | For demo only | |
208 | VAC, three phase |
| |
230 | VAC, three phase |
| |
25 | A @ 12.5 HP continuous output |
| |
60 | A @ 25 HP continuous output |
| |
72 | A @ 33 HP continuous output |
|
50/60 Hz ±2
120 VAC (+/- 10 %), single phase
208 VAC (+/- 10 %), single phase
230 VAC (+/- 10 %), single phase
3 A @ 120VAC
1.5A @ 230 VAC 50/60 Hz ±2
2 | Introduction |