5Installing NetWare Drivers
3NetWare lists the valid slot number(s) for the NIC, depending on how many NICs are installed. The values appearing in the list are the slot values you should use.
Example:
After you issue the command, a message appears. At the end of the message, additional text similar to the following appears:
Total of 2 3C99x PCI adapter card(s) found. Supported slot values are 2,3.
Slot:2
Verifying the Installation and Configuration
To verify that the driver has been properly loaded on NetWare, perform the following procedure:
1At the system prompt, enter: load monitor
The NetWare Monitor screen appears.
2From the Available Options menu, select LAN/WAN Drivers.
The Available LAN Driver menu appears. If the driver has been properly loaded, the driver and frame types associated with the driver appear on this menu.
3Select a driver to view its associated statistics.
A functioning driver displays packets being sent and received.
To verify that the server is communicating over the network, complete the following procedure:
1Set up a NetWare client on a LAN supported by the server to be tested.
2Log in or map to the server.
If you cannot log in or map to the server, the link is not functional.
44