28CHAPTER 3: INSTALLING THE NETWORK DRIVER
9Remove the EtherDisk diskette from drive A, and then click Yes.
You must reboot your PC to complete the installation.
After Windows restarts, you’re prompted for your user name and password.
10Enter your user name and password, and then click OK.
The driver installation is complete. To confirm successful installation, go to “Verifying Successful Installation” later in this chapter.
Windows 98
To install the network driver in a PC running Windows 98:
1Make sure that the NIC is installed in your PC and that it’s connected to the network, as described in Chapter 2.
2Turn on the power to the PC.
Windows 98 detects the NIC. The Add New Hardware Wizard (Figure 7) starts.