3Com 3CSOHO100 manual Windows NT, Click Yes

Page 50

Removing NIC Software

47

Windows NT 4.0

To remove NIC software in a PC running Windows NT 4.0:

1Double-click the My Computer icon, then the Control Panel icon, and then the Network icon.

The Network screen appears.

2Click the Adapters tab.

3Select the name of the NIC in the Network Adapters box, and then click Remove.

4Click Yes to conﬁrm the removal.

5Click Close to close the Network screen.

The NIC driver and diagnostic software are removed from the PC.

You’re prompted to restart the PC.

■If you’re physically removing the NIC from the PC, click No. Don’t restart the PC until you shut down the system, turn the power off, and remove the NIC from the PC.

■If you’re reinstalling the NIC software, click Yes to restart the PC.

Windows NT 3.51

To remove NIC software in a PC running Windows NT 3.51:

1In the Main Program window, double-click

the Control Panel icon, and then the Network icon. The Network Settings window is displayed.

2In the Installed Adapter Cards panel, select the name of the installed NIC and click Remove.

The Network Settings window displays a warning message.

3Click Yes.

The Network Settings window is displayed again. The NIC no longer appears in the Installed Adapter Cards panel.

Image 50

Contents Fast Ethernet Network Interface Card User Guide Lifetime Limited Warranty Sweden, Finland, Norway Asia Italy, Greece, Spain, Portugal, MaltaAustralia, New Zealand Japan Belgium, Netherlands, Luxembourg DenmarkMember of the 3Com OfficeConnect family 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Configuring the NIC Technical Support Page Figures Tables Conventions Icon DescriptionYear 2000 Compliance Convention DescriptionWhat This Guide Covers What This Chapter CoversUnderstanding Networking Sample Network Computer 1Computer PrinterPeer-to-Peer Networks Client/Server Networks Ethernet and Fast Ethernet Networking ProtocolsUnderstanding Network Interface Cards About the OfﬁceConnect NICRequired Software Required HardwareRequired Cabling Preparing for Installation Type Maximum Network Cable Required Cable LengthInserting the NIC See your PC documentation for detailsDo not turn on the power to the PC Connecting the NIC to Your Network Connecting the Network Cable to the NIC RJ-45 portNext step is to install the network driver. Go to Chapter Page Windows Right-click the My Computer icon, and then click PropertiesTurn on the power to the PC Windows 95 Version aYou must reboot your PC to complete the installation Click OKEnter your user name and password, and then click OK Windows 95 Version BClick Finish To install the network driver in a PC running Windows Click Yes to restart the PC Windows NT Windows NTClick Add Adapter Remove the EtherDisk diskette from drive a Verifying Successful InstallationWindows 95 and Windows Double-clickNetwork adapters Double-click the File Manager icon Troubleshooting Basic Troubleshooting TipsInterpreting the LEDs State MeaningStarting the 3Com NIC Diagnostics Program Double-click the 3Com icon in the Windows system trayClick Cancel to exit the 3Com NIC Diagnostics program General ScreenClick the Diagnostics tab Running the NIC Self-TestsRunning the Echo Test Click Start in the Self-Test panelOn both PCs On the ﬁrst PC the sending PCEcho Test Sender Screen Accessing the Help System From the Windows Start menu, select ProgramsAccessing 3Com Support Services Click OK Click the Support tab. The Support screen appearsClick OK Click the Support tab Support ScreenRemoving NIC Software Click the Device Manager tabClick Yes Frequently Asked Questions Question AnswerQuestion Answer Page Auto Select Option Description Available SettingsNormal Displaying Conﬁguration Settings Click NIC Details Click OK Click the Properties tab Changing Conﬁguration SettingsClick OK to exit this screen Change the NIC’s conﬁguration Page Speciﬁcations Cabling RequirementsCategory Use Unshielded Twisted-Pair Cable10BASE-T Operation 100BASE-TX Speciﬁcations 10BASE-T Speciﬁcations100BASE-TX Operation Page 3Com FTP Site Online Technical ServicesWorld Wide Web Site Access by Digital Modem 3Com Bulletin Board ServiceAccess by Analog Modem 847 262Support from 3Com 3ComFacts Automated Fax ServiceSupport from Your Network Supplier 408 727Country Telephone Number Asia Paciﬁc Rim EuropeNorth America Returning Products for RepairCountry Telephone Number Latin America Country Telephone Number Fax NumberLatin America 408 326 A. and Canada 800 NET 3Com 800 638 Ethernet Bus masteringClient/server network Half-duplex Fast EthernetFull-duplex HubServer SwitchPeer-to-peer network Unshielded twisted pair UTP cablingPage Index NumbersNIC Index Page 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity