ADIC 4000, 7000DLT Drive Operating Conditions, Right Indicator Panel LED

POST completes in about 13 seconds and the drive responds normally to all ommands. However, it may take longer for the media to become ready.

Drive Operating Conditions

LED Indicators

Use Table 5-3 on page 5-6 to determine the drive’s operating condition.

Table 5-3	Operating Condition Indications
		Right Indicator Panel LED
Label		Color	State	Operating Condition
Write Protected		Orange	ON	Tape is write-protected.
			OFF	Tape is write-enabled.
Tape in Use		Yellow	Blinking	Tape is moving.
			ON	Tape is loaded; ready for use.
Use Cleaning Tape		Yellow	ON	Drive head needs cleaning,
			Remains on	or the tape is bad.
			after unloading	Cleaning attempted, but tape
			cleaning tape	expired, so cleaning not
			After cleaning,	performed.
			turns on again	Problem data cartridge. Try
			when reloading	another cartridge.
			data cartridge
Operate Handle		Green	ON	OK to operate the Cartridge
			OFF	Insert/Release Handle.
			Blinking	Do not operate the Cartridge
				Insert/Release Handle.
				Drive was powered on with
				door open. Close door and
				let drive complete
				initialization.
All Right Indicator		-	ON	POST is starting.
Panel LEDs or,			Blinking	An error has occurred.
All Left Indicator
Panel LEDs

5-6 Operation and Maintenance

62-0162-01