Cisco Systems CTSMX20042K9 manual Calling participants to add them to an ongoing call Multiway

Page 21

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200

Contents

Getting started

Placing calls

Using directories

In-call features

Settings

User guide

Contact us

Calling participants to add them to an ongoing call (Multiway)

Calling more than one using Multiway is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.

While in a call you may add participants provided that your system permits to do so. Tap Hold to put the ongoing call on hold...

The call will now be transferred to the Multiway server and handled from there. This may take a little while...

... then select, in the usual way, whom to add to the ongoing call.

When everything is ready the Join button will appear. Tap this and the bottom line will change

to read Meeting. This may take a little while.

Since the calls have been transferred to the Multiway server you are still in a point-to-point call, but now with the Multiway server as the far end. This applies to all the other participants as well.

Once you have selected someone, tap Start to begin including this participant in the meeting.

Tap END to disconnect yourself. The other participants must do the same to disconnect themselves from the Multiway server.

D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.

21

www.cisco.com

All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.

Image 21
Contents Use with Cisco TelePresence Touch Administrator settings-Reset Administrator settings-Call settingsWhat’s in this guide? History Searching Directory FavoritesGetting started Basics of the Touch Controller Scroll in listsAs outlined Selfview and camera control Tap Camera control to gainEntering Camera Control will For the new preset Adding a near end camera presetTap More  then tap PressTap Update to current position Changing an existing near end camera presetTap More Then tap Tap the field to the right Removing an existing near end camera presetTap Camera Control & Settings to open Camera whitebalance, exposure, and backlight compensationBacklight compensation improves Ring tones and sounds Sound mattersDo not disturb Receiving callsPlacing calls Search or Dial field  Calling someone by entering the URISearching and calling an entry in any of the lists Calling an entry in one of the lists Then tap Favorites , Directory , or HistoryEntries, if needed Calling more than one Using Favorites Directory and History Directory HistoryFavorites SearchingIn-call features Layout lets you Change the layout Gain access Features in a call-an overviewOn or off MultiSite onlyUser guide Calling participants to add them to an ongoing call Multiway Receiving another incoming call Features when putting someone on holdSelect whom to transfer to in the usual way Transferring an ongoing callNear end camera control Near end camera presets Using Touch Tones Dtmf in a callFar end camera control in a call only Sharing contents-conducting presentations Speaks gets Shown in frames Full screen Layout controlMain frame. Identical sizes Nothing else is ShownSettings SettingsAccess the Settings as follows Gaining access to the SettingsSystem Information Call Status Camera Control & Settings Ringtone & Sound Settings Administrator settings-Date, Time & Location Administrator settings-Call settings Administrator settings-IP settings for the codec Administrator settings-IP settings for the Touch controller Administrator settings-Pairing Administrator settings-H.323 settings An H.323 aliasGatekeeper discovery Manual or Automatic Administrator settings-SIP settings Administrator settings-Provisioning Administrator settings-Multiway Settings Administrator settings-EMC Resilience mode Administrator settings-Reset Contact us