Agilent Technologies N5980A manual Connection Menu

Reference for the User Interface

	Store Setting As
	This is used to store/recall any setting with a user selected filename.
	The user selects a specific location, and file name to save the settings.
	Recall Setting
	This recalls the saved settings.
	Factory Default Setting
	Restores the factory default settings, and is useful when the user has
	problems finding a defined instrument state.
	Instrument Default Setting
	This is enabled only when Advanced Mode is on. The Instrument
	Default Setting has three options related to the default setting.
	Store Current Setting As Instrument Default, stores the
	instruments current setting as default for this instrument. The
	instrument default setting will be automatically applied whenever the
	user software connects to the instrument. The instrument default
	setting is stored individually for each instrument based on the
	instrument's serial number.
	Recall Instrument Default Setting, recalls the instrument's default
	setting.
	Delete Instrument Default Setting, deletes the instrument's default
	setting.
	If no User Setting exists, the factory default setting will be applied
	when the User Software connects to the instrument.
	This setting is stored individually for each instrument by storing the instrument
NOTE
	serial number in the file name.
	.

Exit

This closes the session with N5980A.

Connection Menu

This has the following options:

22 N5980A User Guide