Copying a Configuration File from a Host to Digi One/PortServer TS 2/4
This section describes how to copy the configuration file from a host to Digi One/PortServer TS 2/4 after the file has been edited on the host.
Related Information
See the cpconf command in the Digi One/PortServer TS Command Reference.
Starting Point
This procedure assumes that you
•Have edited a configuration file on a host and now want to copy it to Digi One/PortServer TS 2/4 for use
•Are logged in to Digi One/PortServer TS 2/4 as root, which is a requirement for using the cpconf command to copy the configuration file to a host
Supply a cpconf command with a fromhost field that specifies the following:
•The IP address of the source host
•The name of the configuration file on the host
Example
cpconf fromhost=199.250.121.12:cnfg-fle
Managing the OS and Configuration |