where
•name is the name of a user
•host is either an IP address or DNS name of a host running TFTP
•key is the name of a file that contains the DSA public key. If your host’s implementation requires a complete path to the file, specify the path here as well.
Example: set user name=secure
Example: SSH2 and Menu Access
In this example, a Digi device is configured to use an SSH2 public key, and it presents a menu to the administrator, from which he or she will select a device to manage.
Key aspects of this configuration include the following:
•Two ports to which the managed devices are connected specify dev=prn, a device type that does not spawn a login from the Digi device.
•A menu specifies connect commands, which when selected provide connections to ports 1 and 2 and the managed systems. The menu also specifies a menu table index number of 6 (on the range parameter), which is then linked to a user with the set user command
set ports dev=prn
set menu name=menu1 t1="Console Management Menu" range=6
set menu name=menu1 range=6 name="Console Management Menu" m1="Connect to System 1"
set menu name=menu1 range=6 c1="connect 1" m2="Connect to System 2" set menu name=menu1 range=6 c2="connect 2"
set user name=admin1 defaultaccess=menu menu=6 password=on outgoing=on set user name=admin1
Example: Alternate IP Addresses
Configuration
In this example, the Digi One/PortServer TS 2/4 is configured with
•Alternate IP addresses using set altip commands, which assign IP addresses to ports 1 and 2. This enables direct access to one of these ports with a Telnet command that specifies one of the IP addresses.
•Password protection on ports 1 and 2. This is done with the set auth command.
set ports dev=prn
set altip group=1 ip=119.180.33.50 set altip group=2 ip=119.180.33.51
User Command
In this example, a user Telnets to port 1 using an IP address. He/she will be required to log in before access to the port is granted.
telnet 119.180.33.50
Configuring Console Management |