●Automatically log into a VPN when you connect to a specific network. (See “Auto Launch” on page 103.)
Use existing VPN profile
Select this option if the VPN client software you will be using is supported by Sprint SmartView. Then, specify the supported VPN client software and the Login Profile that you want to use. (See “Supported Clients” on page 62 for more information on supported VPN client software.)
Use third party VPN client
Select this option if the VPN client software you will be using is not supported by Sprint SmartView, and then follow these steps:
1.Click Browse.
2.Select the program file to be launched.
3.Click Open. The path of the selected file should now appear in the Command line field.
4.If the VPN client software requires that additional parameters be included after the program filename on the command line, these may be entered in the Parameters field. Consult the documentation for the VPN client to determine if such parameters are needed.
See “Supported Clients” on page 62 for more information on which VPN client software is supported.
Auto Launch
Select this check box if you want new Network Profiles created to automatically launch the VPN software specified above each time you connect. Note that this is only a default. You can change this setting for an individual profile by selecting or clearing the VPN Auto Launch check box on the General tab of the properties for the desired profile. (See “Automatically Launching a VPN Connection” on page 64 for more information.)
Sprint SmartView Settings
Sprint SmartView Settings | 103 |