Click this icon to enable NMEA. The icon will turn white. Click again to disable NMEA.
(white)
GPS and NMEA enabled. In this state, GPS data is received by the Sprint SmartView application and data is shared with
Additionally, NMEA will be enabled automatically when you launch an application using the GPS Applications Menu.
Shutting Off GPS Entirely
If you wish to disable GPS entirely, check the Disable GPS on Device field on the Location/GPS settings tab. (See “Disable GPS on Device” on page 98.) This disables GPS and removes all
The GPS Search Menu
If your device contains a GPS receiver, you can use the GPS Search menu to search for the nearest restaurants, gas stations, and other amenities. This
To perform a search:
1.Specify the type of location to search for by doing one of the following:
Pull down the menu to select one of the predefined searches (see below).
Type what you are looking for in the field at the top of the menu. (Sprint SmartView will search for the nearest examples of whatever you typed and then add this search to the menu.)
2.Click Find.
Note: As custom searches are added, the list can potentially become quite long. Items can be removed from the list using the window that appears when you click Configure GPS Applications in the Location/GPS tab of the settings window.
Predefined Searches
The following search items are predefined by Sprint:
●Sprint Stores
●Local Restaurants
●Local Banks
●Local Hotels
●Local Gas Stations
●Local Coffee Houses
Note: The Sprint SmartView software does not currently support GPS receivers on wireless phones.