Franklin U600 manual Creating a Profile for a WiFi Network

Creating a Profile for a WiFi Network

Perform these steps to create a WiFi network profile.

1.Select Profiles from the Tools menu. The Network Profiles window will be displayed.

2.Select Add New Profile from the Settings menu. A list of network profile types appears.

3.Select WiFi and then click Add to launch the wizard used to create WiFi network profles.

4.In the SSID field, enter the broadcast name of the network to which you will be connecting. Note that the name entered here must match the SSID (Service Set IDentifier) used by the network exactly.

5.If the network is a Closed network, select the This is a non-broadcasted network check box.

6.If the network whose profile you are configuring does not use WEP or WPA encryption, leave the Enable data encryption check box cleared.

–or–

If the network uses WEP or WPA encryption, select the Enable data encryption check box and configure the WiFi Data Encryption Settings as explained in “Configuring WiFi Data Encryption” on page 68.

Network Profiles

Network Profiles 67