LINESHARE PRO
When ON, this feature is typically used when all the phones are wired directly to the primary default port of the Lineshare Pro. If you pick up a phone connected to the primary default port, and hear a busy tone indicating that a device on another port is on the line, simply hang up the phone. After the other device releases the line, OLN signals the phone devices connected to the primary default port with a short ring. You now have an open telephone line to make a call.
The OLN feature is
1 Turn ON
6 Open Line Notification
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
[7]Inbound Tone Transfer
Inbound Tone Transfer operates only when the Lineshare Pro is configured in the
This feature enables you to manually transfer an inbound call from the primary default port to another port using your
The Inbound Tone Transfer is factory preset OFF, 0 7 *. To turn the Inbound Tone Transfer ON, enter the programming mode and press the following on your tone phone:
1 Turn ON
7 Inbound Tone Transfer
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
[8]Ring Reduction
Ring Reduction is designed mainly to accommodate
During unattended hours, if your phones aren’t answered by the sixth ring (primary default port ring count), the Lineshare Pro automati- cally reduces the number of rings available to the primary default port to two. The next time a call is answered and routed to the primary default port, the Lineshare Pro will only ring the primary default port two times and then route the call to the next port in the Cascade Port Order.
42