LINESHARE PRO
[7][5] Time at Home
The Time at Home function controls the amount of time that the Lineshare Pro holds the phone line open and listens for a routing command. It is activated when the Lineshare Pro is in the secured mode, or when Home Routing is turned ON and a call is routed home. When the Time at Home period expires, the Lineshare Pro disconnects the call without rerouting to another port.
NOTE
You must turn ON the Home Routing feature in order for this function to activate, even in the secured mode.
The Time at Home is factory- preset, 3 0 *, which allows 30 seconds for a routing command to be entered. The range of this function can be set between 1 to 60 seconds.
To change the Time at Home to 40 seconds, enter the programming mode and press the following on your tone phone:
7 5 Time at Home
4 0 Set time to 40 seconds
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
[7][6] Extension Detection Timer
The Extension Detection Timer operates only when the Lineshare Pro is configured in the
This function controls the amount of time that the Lineshare Pro allows an extension phone (not connected to one its ports) to answer an incoming call that is ringing the primary default port.
The Extension Detection Timer is factory preset, 1 5 *, which allows 15 seconds for a routing command to be entered. The timer can be set for from 1 to 30 seconds.
To change the Extension Detection Timer to 25 seconds, enter the programming mode and press the following on your tone phone:
7 6 Extension Detection Timer
2 5 Set time to 25 seconds
*End programming sequence (3 beeps indicate correct entry)
(Optional entries for additional changes)
*Save changes and exit programming
[8]Rings Available to the Ports
The Rings Available to the Ports feature allows you to define the number of rings available to each port. The number of rings available to the ports range from 0 to 99 rings. The Rings Available to the Ports are
50