www.axxessid.com
Installation & User Guide
New doors can be added by simply plugging the DTU into the controller and returning back to the PC. This will automatically start the new device wizard, which allows you to add the new controller. There is no need to
Adding Card Formats using a DTU
A single transaction can also be brought back to the PC by inserting the DTU into the controller and whilst inserted, use a card at the reader. When you return to the PC the transaction will show on the transaction screen. If it is an unknown card type, it will automatically start the card format wizard allowing the addition of the card type to the database (subject to technology type).
The DTU does not contain any batteries, which might need replacing. It is powered directly from the controller and at the PC by the
Data is permanently stored in the DTU without the need for batteries; this means the DTU can easily be sent in the post to update for instance remote sites. On and offline controllers can be combined within one system.
DTU Step by Step
1 2
3 4
5
6
AX200 Installation & User Guide – July 2007 | 1 0 6 |