www.axxessid.com
Installation & User Guide
Provide a name for the access point i.e. the location and select OK.
Plug & Play Devices
The PC communication port is automatically setup and new devices connected will be automatically detected and can be added (or replaced) using the new device wizard, which allows setting up a new controller in seconds. When enabled under system settings, Plug & Play is active at all times and does not require a restart of the application or computer. This allows addition of new controllers on the fly. AX readers are also entirely Plug & Play being automatically identified with the relevant information displayed under access points. COM ports 1 to 16 and TCP/IP (TCP/IP AX200 only) addresses can also be set up manually if required. Error correction, speed, bit length, parity etc are all automatically set up for the optimum performance of the system. Once the controllers are in the system, the new device wizard also allows
All the Plug & Play devices have a unique identity number so no jumpers or switches have to be set on either controllers or readers.
AX200 Installation & User Guide – July 2007 | 2 8 |