www.axxessid.com
Installation & User Guide
PIN Timeout: Indicates in seconds, the time required to enter the PIN number before clearing the buffer or sending the data as invalid or incomplete. A longer time might be required for elderly, disabled or specific locations i.e. car parks.
High Security activates PIN: The system normally operates in card only mode and changes to card + PIN when a High Security card is used four times at the reader. This is normally used at the end of the day to increase security after normal office hours.
Device Parameters
Device name & Identity are displayed on the top left of the screen. Device name could be specified in the Access Point Settings section under the Access Point tab. Do not attempt to change the Identity manually; it may no longer be recognized by the application.
Every device is given a specific name when connected to the PC. Device Name could be changed in the Device Manager tab.
Device Group
This specifies the type of device connected.
Device Type
Within the device group the type of unit
Hardware Version
Hardware revision number
AX200 Installation & User Guide – July 2007 | 6 0 |