Ricoh VT1730 manual Standard Printing, Using the Number keys, enter the number of prints required

Page 20

Standard Printing

OPERATION

Standard Printing

ClThe leading edge margin of the paper must be more than 5 mm, 1/5”, because if there is no margm on the paper, the paper might be misfed, or might become di~. If there is no margin on the original, adjust the image position by pressing the Image Position key. See page 24.

~Set the original straight. If you set the ori inal obliquely, the original will be fed obliquely and the original image may be distorte 3 .

Important

r

The stack should not exceed 6 sheets of normal thickness paper. I

Caution: While printing, do not move the paper delivery rollers. Otherwise, the drum maybe damaged.

1.Adjust the original guides to the size of the original.

2.Insert the original face down in the ADF until it stops.

IJ *Do not insert different size originals at the same time.

~The fed original may not be delivered completely from the ADF until the next original is fed.

3* Using the Number keys, enter the number of prints required.

fJ Up to 9999 prints can be entered at one time.

0 To change the number entered, press the Clear key and then enter the new number.

19

Image 20

Contents Priport VT1730 Table Completed prints are delivered here. See Major ComponentsMachine Exterior Operation Panel = KeysWhen the Master Making key is Stop making a master, the ~+Press to enter Will not continue making the masterInstallation Requirements Machine EnvironmentEnvironments To Avoid Optimum environmental conditionsPower Connection Access To The MachineSupplying the Master ROLL, INK, and Tape Supplying The Master RollPage Remove the cut-off portion of the master roll Close the top coverSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation Loading paper ClWhen you load thick and small paper, seePreparation For Printing Place the paper on the paper feed table Setting up the paper delivery table Adjust the paper delivery rollers to match the paper size Lbc-&55iihUsing the Number keys, enter the number of prints required Standard PrintingPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Adjusting The Image Position Shifting the image position forward or backwardPress the right or left Image Position key Press the Proof key. Check the image positionShifting the image to the right or left Operation Adjusting The Image Density LighterChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Press the Enter key again. The memory returns to Memory Set the originals face down on the original tablePhoto Mode Printing Daily Maintenance Thermal HeadDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper Troubleshooting $~+FWhen the Open Cover/Unit Indicator ~ Lights When the Supply/Exchange Indicators LightWhen Other Indicators Light ~+AOpen the ADF rover Pull out the original gently When The Misfeed Indicator + Lights++ a Original ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights When The Supply/Exchange Indicators Light Remove the used mastersWhen Other Indicators Light Poor Printing Thermal head SeeOperation Notes Operating Cautions General CautionsIf your hands are stained with ink Specifications Mm, 3.5 xOptional Equipment Consumables Weight 51kg L121b Power SourceNoise Emission