Ricoh VT1730 manual Paper Feed Roller

Page 40

Paper Feed Roller

DAILY MAINTENANCE

Paper Feed Roller

If you don’t clean the paper feed roller, the leading edge of the print may become dirty.

1. Open the paper feed table and press	I	u l’ I
down the feed roller pressure lever.

2.Wipe off paper dust on the paper feed roller with almhol or cleaner.

39

Image 40

Contents Priport VT1730 Machine Exterior Major ComponentsTable Completed prints are delivered here. See Operation Panel = KeysWhen the Master Making key is Stop making a master, the ~+Press to enter Will not continue making the masterInstallation Requirements Machine EnvironmentEnvironments To Avoid Optimum environmental conditionsPower Connection Access To The MachineSupplying the Master ROLL, INK, and Tape Supplying The Master RollPage Remove the cut-off portion of the master roll Close the top coverSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation Preparation For Printing ClWhen you load thick and small paper, seeLoading paper Place the paper on the paper feed table Setting up the paper delivery table Adjust the paper delivery rollers to match the paper size Lbc-&55iihUsing the Number keys, enter the number of prints required Standard PrintingPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Adjusting The Image Position Shifting the image position forward or backwardPress the right or left Image Position key Press the Proof key. Check the image positionShifting the image to the right or left Operation Adjusting The Image Density LighterChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Press the Enter key again. The memory returns to Memory Set the originals face down on the original tablePhoto Mode Printing Daily Maintenance Thermal HeadDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper Troubleshooting $~+FWhen the Open Cover/Unit Indicator ~ Lights When the Supply/Exchange Indicators LightWhen Other Indicators Light ~+A++ a Original When The Misfeed Indicator + LightsOpen the ADF rover Pull out the original gently ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights When The Supply/Exchange Indicators Light Remove the used mastersWhen Other Indicators Light Poor Printing Thermal head SeeOperation Notes Operating Cautions General CautionsIf your hands are stained with ink Specifications Mm, 3.5 xNoise Emission Weight 51kg L121b Power SourceOptional Equipment Consumables