Ricoh VT1730 Stop making a master, the ~+, Press to enter, Will not continue making the master

Page 4

Operation Panel

MAJOR COMPONENTS

MEMORY/CLASS		KEY	STOP KEY
Press to select group			Press to stop the machine. The
printing. See	page	31	machine will continue printing when
and 33.	\		the Print Start key is pressed.	If you
			stop making a master, the “~+	A“

		NUMBER KEYS	indicators will blink and the machine
		Press to enter the	indicators will blink and the machine
		Press to enter the	will not continue making the master
		numb~r of prints.	will not continue making the master
	\	numb~r of prints.	when the Master Making key is
			when the Master Making key is

\I

MASTER

~MAKINGKEY Press to make a master.

m

CLEAR KEY

Press to change

/the number that

ENTER KEY

is set in the

Press to input

munter.

information into the memory.

\

PROOF KEY Press to make trial prints or extra prints.

PRINT START KEY Press to start printing.

Image 4

Contents Priport VT1730 Machine Exterior Major ComponentsTable Completed prints are delivered here. See Operation Panel = KeysWhen the Master Making key is Stop making a master, the ~+Press to enter Will not continue making the masterInstallation Requirements Machine EnvironmentEnvironments To Avoid Optimum environmental conditionsPower Connection Access To The MachineSupplying the Master ROLL, INK, and Tape Supplying The Master RollPage Remove the cut-off portion of the master roll Close the top coverSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation Preparation For Printing ClWhen you load thick and small paper, seeLoading paper Place the paper on the paper feed table Setting up the paper delivery table Adjust the paper delivery rollers to match the paper size Lbc-&55iihUsing the Number keys, enter the number of prints required Standard PrintingPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Adjusting The Image Position Shifting the image position forward or backwardPress the right or left Image Position key Press the Proof key. Check the image positionShifting the image to the right or left Operation Adjusting The Image Density LighterChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Press the Enter key again. The memory returns to Memory Set the originals face down on the original tablePhoto Mode Printing Daily Maintenance Thermal HeadDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper Troubleshooting $~+FWhen the Open Cover/Unit Indicator ~ Lights When the Supply/Exchange Indicators LightWhen Other Indicators Light ~+A++ a Original When The Misfeed Indicator + LightsOpen the ADF rover Pull out the original gently ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights When The Supply/Exchange Indicators Light Remove the used mastersWhen Other Indicators Light Poor Printing Thermal head SeeOperation Notes Operating Cautions General CautionsIf your hands are stained with ink Specifications Mm, 3.5 xNoise Emission Weight 51kg L121b Power SourceOptional Equipment Consumables