Ricoh VT1730 With the Number keys, enter the desired number of sets, Press the Print Start key

Page 33

OPERATION

Group Printing From The Same Original (Class Mode)

5.With the Number keys, enter the desired number of sets.

Cl The maximum number of sets that can be made is 20.

6.Turn on the power Sw tch of the tape dispenser (option).

7.Press the Master Making key. Check the image position by making prints with the Proof key.

IJ If the image position is not correot, adjust it using the Image Position key (See page 24) or the side plate fine adjustment dial (See page 25).

8.Press the Print Start key.

After the last page of each printingset is fed out to the paper delivery table, the tape dispenser dropsa strip of paper onto the top of the paper stack. This marks the end of each printinggroup.

If the power switchof the optionaltape dispenser is turned off or the tape dispenser is not installed in your machine, the group printingcycle stops after each group is finished. Remove the group fromthe paper delivery table and press the Print Start key to start the next group printingcycle.

32

Image 33

Contents Priport VT1730 Major Components Machine ExteriorTable Completed prints are delivered here. See = Keys Operation PanelStop making a master, the ~+ When the Master Making key isPress to enter Will not continue making the masterMachine Environment Installation RequirementsEnvironments To Avoid Optimum environmental conditionsAccess To The Machine Power ConnectionSupplying The Master Roll Supplying the Master ROLL, INK, and TapePage Close the top cover Remove the cut-off portion of the master rollSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation ClWhen you load thick and small paper, see Preparation For PrintingLoading paper Place the paper on the paper feed table Setting up the paper delivery table Lbc-&55iih Adjust the paper delivery rollers to match the paper sizeStandard Printing Using the Number keys, enter the number of prints requiredPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Shifting the image position forward or backward Adjusting The Image PositionPress the right or left Image Position key Press the Proof key. Check the image positionShifting the image to the right or left Operation Lighter Adjusting The Image DensityChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Set the originals face down on the original table Press the Enter key again. The memory returns to MemoryPhoto Mode Printing Thermal Head Daily MaintenanceDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper $~+F TroubleshootingWhen the Supply/Exchange Indicators Light When the Open Cover/Unit Indicator ~ LightsWhen Other Indicators Light ~+AWhen The Misfeed Indicator + Lights ++ a OriginalOpen the ADF rover Pull out the original gently ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights Remove the used masters When The Supply/Exchange Indicators LightWhen Other Indicators Light Thermal head See Poor PrintingOperation Notes General Cautions Operating CautionsIf your hands are stained with ink Mm, 3.5 x SpecificationsWeight 51kg L121b Power Source Noise EmissionOptional Equipment Consumables