Ricoh VT1730 Shifting the image to the right or left, Press down the feed roller pressure lever

Page 26

AdjustingThe Image Position

Shifting the image to the right or left

1.Press down the feed roller pressure lever.

IJ If you do not press down the feed roller pressure lever, the top sheet of papermay be misfed.

2.	If the top sheet of paper		is caught by	I
2.	If the top sheet of paper		is caught by
	the feed	roller, remove the paper and
	reinsert	it. Then, lift the	feed roller
	pressure	lever.

3.Turn the side plate fine adjustment dial as shown in the illustration.

CJ Before installingpaper, make sure that the table is positioned in the center by referring to the indicator.

O The image position can be shifted up to 10 mm, 2/5” each way.

OPERATION

I

25

Image 26

Contents Priport VT1730 Table Completed prints are delivered here. See Major ComponentsMachine Exterior Operation Panel = KeysPress to enter When the Master Making key isStop making a master, the ~+ Will not continue making the masterEnvironments To Avoid Installation RequirementsMachine Environment Optimum environmental conditionsPower Connection Access To The MachineSupplying the Master ROLL, INK, and Tape Supplying The Master RollPage Remove the cut-off portion of the master roll Close the top coverSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation Loading paper ClWhen you load thick and small paper, seePreparation For Printing Place the paper on the paper feed table Setting up the paper delivery table Adjust the paper delivery rollers to match the paper size Lbc-&55iihUsing the Number keys, enter the number of prints required Standard PrintingPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Press the right or left Image Position key Adjusting The Image PositionShifting the image position forward or backward Press the Proof key. Check the image positionShifting the image to the right or left Operation Adjusting The Image Density LighterChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Press the Enter key again. The memory returns to Memory Set the originals face down on the original tablePhoto Mode Printing Daily Maintenance Thermal HeadDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper Troubleshooting $~+FWhen Other Indicators Light When the Open Cover/Unit Indicator ~ LightsWhen the Supply/Exchange Indicators Light ~+AOpen the ADF rover Pull out the original gently When The Misfeed Indicator + Lights++ a Original ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights When The Supply/Exchange Indicators Light Remove the used mastersWhen Other Indicators Light Poor Printing Thermal head SeeOperation Notes Operating Cautions General CautionsIf your hands are stained with ink Specifications Mm, 3.5 xOptional Equipment Consumables Weight 51kg L121b Power SourceNoise Emission