Ricoh VT1730 manual If your hands are stained with ink

Page 61

CAUTIONS

6.Do not operate the machine with any rovers off.

7.Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper.

8.Do not use thermal head cleaner for anything but cleaning the thermal head. Be careful as this cleaner is flammable. Take note of the following cautions regarding the cleaner:

I= Do not ingest.

=Do not inhale the cleaner’s fumes.

-Keepout of the reach of children.

=If cleaner comes in contact with your skin, wash well with water.

=Keep away from your eyes. If cleaner comes in contact with your eyes, wash well. If irritation occurs, contact a doctor.

=Never placecleanerwhere it will be exposed to heat.

9.If your hands are stained with ink:

-Avoid prolonged or repeated contact with your skin.

=CIeanse your skin thoroughlyafter contact, before breaks and meals, and at the end of your work period.

=Ink is readily removed from skin by waterless hand cleaners, followed by washing with soap and water.

Also, be careful not to get any ink on your dothing while emptying the master eject box or while loading a new ink cartridge.

60

Image 61

Contents Priport VT1730 Machine Exterior Major ComponentsTable Completed prints are delivered here. See = Keys Operation PanelStop making a master, the ~+ When the Master Making key isPress to enter Will not continue making the masterMachine Environment Installation RequirementsEnvironments To Avoid Optimum environmental conditionsAccess To The Machine Power ConnectionSupplying The Master Roll Supplying the Master ROLL, INK, and TapePage Close the top cover Remove the cut-off portion of the master rollSupplying Ink Close the ink cover Option Supplying Tape For The Tape D~penser Option Operation Operation Preparation For Printing ClWhen you load thick and small paper, seeLoading paper Place the paper on the paper feed table Setting up the paper delivery table Lbc-&55iih Adjust the paper delivery rollers to match the paper sizeStandard Printing Using the Number keys, enter the number of prints requiredPress the Print Start key Remove the prints from the paper delivery table Restoring The Paper Feed And Paper Delivery Tables Page Shifting the image position forward or backward Adjusting The Image PositionPress the right or left Image Position key Press the Proof key. Check the image positionShifting the image to the right or left Operation Lighter Adjusting The Image DensityChanging The Printing Speed To Stop The Machine During a Printing Run Making Master And Prints Automatically Group Printing From The Same Original Class Mode With the Number keys, enter the desired number of sets Group Printing From Different Originals Memory Mode Set the originals face down on the original table Press the Enter key again. The memory returns to MemoryPhoto Mode Printing Thermal Head Daily MaintenanceDaily Maintenance Contact Glass Paper Feed Roller Paper Delivery Rollers Exit Sensor Drum Clamper $~+F TroubleshootingWhen the Supply/Exchange Indicators Light When the Open Cover/Unit Indicator ~ LightsWhen Other Indicators Light ~+A++ a Original When The Misfeed Indicator + LightsOpen the ADF rover Pull out the original gently ++ B Paper misfeed in paper feed section Troubleshooting ++ c MaSter misfeed in master feed section II ++ E Paper wrapping around the drum When The Misfeed Indicator Liahts To remove misfed sheets of paper Close the top cover + G Paper misfeed in the paper exit section When The Open Cover/Unit Indicator ~ Lights Remove the used masters When The Supply/Exchange Indicators LightWhen Other Indicators Light Thermal head See Poor PrintingOperation Notes General Cautions Operating CautionsIf your hands are stained with ink Mm, 3.5 x SpecificationsNoise Emission Weight 51kg L121b Power SourceOptional Equipment Consumables