Ricoh AP3200 Loading Paper in PS420 Paper Feed Unit, Slide the paper tray out until it stops

Setting Up the Printer

Loading Paper in PS420

(Paper Feed Unit)

Note

❒You can load A4 long-edge feed

(Metric version) or 81/2" ⋅ 11"

2 long-edge feed (Inch version) size into PS420. If you want to change the paper size A4 to 81/2" ⋅ 11" (Metric version) or 81/2" ⋅ 11" to A4 (Inch version), contact your sales or service representative.

❒Load paper of the same size in the right and left sides of the paper feed unit.

A Slide the paper tray out until it stops.

ZAEY200E

Important

❒Align the paper stack so that the left stack is flush with the left side, and the right stack is flush with the right side.

❒Do not stack paper over the lim- it mark.

❒Confirm that the end fence (A) locks completely after loading the right side paper.

❒If you want to change the paper size, contact your sales or ser- vice representative.

Note

❒To avoid paper multi-feeds, shuffle sheets before setting them in the tray.

❒Load the paper face up onto the tray.

❒If either side or the leading edge of paper is curled, straighten it, and then load it.

C Slide the tray into the printer un- til it stops.

B Load paper completely into the tray.

ZAEY201E

48