1. Getting Started
This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
1.Exposure glass cover (optional), ADF (optional), or ARDF (optional)
(The illustration shows the ADF.) See “External Options”
2.Exposure glass
Place originals face down here for copy- ing.
3.Upper Left Cover
Open this cover to remove jammed pa- per.
4.One sheet output tray
Open this tray when copying or printing from the
AMA064S
7.Front Cover
Open to access the inside of the machine.
8.Operation switch
Press to turn the power on (the On indi- cator lights up). To turn the power off, press again (the On indicator goes off).
9.Control panel
See “Control Panel”.
10.Internal Tray
Copied or printed paper and fax messag- es are delivered face down here. When paper jams occur, open the front cover, and then open this tray.
5.Left Cover
Open this cover to remove jammed pa- per.
6.Lower Left Cover
Open this cover to remove jammed pa- per.
11.Paper Tray 1
Load paper here.
12.Duplex Unit (optional)
Flips paper during
13.Lower Paper Trays (optional)
Load paper here.
9