. Be careful not to touch the OPC (Organic Photo Conductor, blue material) inside the copier.
•Do not expose the OPC to light.
0 Remove all tapes.
Remove shipping thumbscrew 0, then open the platen cover. (No thumbscrew 0
m for type i model) *
Next, remove shipping thumbscrew 0, and attach the sticker to conceal the hole of shipping thumbscrew 0.
The removed shipping thumbscrews should be kept as shown in step a for future shipping.
m:Do not turn on the main switch until the two shipping thumbscrews have been removed, otherwise the copier may be damaged.
Store the two shipping thumbscrews as shown. (Only short thumbscrew with type
-1 model)
m:Make sure to keep the shipping thumb- screws; they must be attached prior to shipping.
aa
a
Remove the paper in the unit.
Close the ton unit bv pressing down firmly on the marked position.
Attention: Make sure to press the marked position.
15