Ricoh FT1208, 1008 manual Adjusting values/modes, Auto image density levelUser mode

Page 36

Adjusting values/modes

When the desired user tool number is lit on the copy counter and the Photo Mode indicator is blinking, enter the required setting using the + and - keys.

• For the settings, refer to pages 37-40.

Press the Image Density adjust- ment key.

The setting will be stored in memory.

• The setting number and the Photo Mode indicator blink. Now, you can access another user tool number by pressing the + and - keys.

To exit user tools, turn the main switch off and then back on again.

1. Auto image density levelUser mode 1

If the image density in the auto image density mode is too dark or too light, adjust it using this function.

Default: Normal (Number: 0)

Setting Normal Light Lighter Lightest Dark Darker Darkest

Number

0

1

3

5

2

4

6

•If your desired image density could not be obtained with the adjustment in “User mode l”, adjust it by sliding the image density recalibration switch to the right. (Refer to page 34.)

37

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Ricoh FT1008/1208 For details, see pages Essential Symbols Page Power cord Main Switch Guide Plates Qpe1&2 Press to reduce/enlarge copies in preset ratios. See 20-21 Clearing Misfeeds Auto-off mode -for automatically Saving powerPage Page Remove the toner cassette from the vinyl bag Adjusting the paper length Adjusting the paper widthPage Confirm that the copy tray is securely in place Power Connection Turning Copier OnAuto-off mode for automatically saving power Copier Location Bypass Feed Copying Alignment of Originals ++ +o Align the center of the original to the arrow mark Transparencies LetterheadTwo-sided copies Page Page Page Press the Start key to make the first copy Page Page Page User Tool Adjustable item See Number Page Adjusting values/modes Auto image density levelUser modeDarker-side manual image density level User mode Auto reset durationUser mode Page Maintaining the Copier Copy YieldKeep the vinyl bag for repacking Page Platen Cover P y Tray Bypass Feed Page Keep this tool inside the copier Attension Make sure to press the marked position Page Page Page Page Put the toner cassette in a vinyl bag Put the copier in the cardboard box When Pz appears on the copy counter When & stays onCondition Cause Remedy See Condition Cause Remedy PZe Page When PE appears on the copy counter When & is lit Specifications Configuration Copy Paper WeightCopy Process OriginalsDimensions Page Page Page EE@rnm~
Top Page Image Contents