Put the toner cassette in a vinyl bag.
m:To prevent the toner from spilling out, make sure you seal the vinyl bag firmly.
Remove the two shipping thumb- screws from inside the copier. (Only short thumbscrew with type 1 model.)
Close the top unit by pressing down firmly on the marked posi- tion.
Attention: Make sure to press the marked position.
Remove the sticker and insert the two shipping thumbscrews into the holes, then tighten them as shown. (Only short thumbscrew with type 1 model.)
•Make sure to insert the shipping thumbscrews to prevent damage while moving the copier.
Remove copy tray as shown. First, gently lift it up 0 ,then pull it out 0.
Put the copier in the vinyl bag.
52