To make copies the same size as your originals.
0
0++ +o
1,z 3 , . . . . . . . . . . . . . . . . . . . . 48,49,50
eb
Lift the platen cover and place the original face down on the exposure glass. Align the center of your original with the arrow mark on the scale. Lower the platen cover.
If your copier includes an enlarge- ment/ reduction feature (Type 2 panel only), make sure the magni- fication ratio is set to Full Size. If not, press the Reduce/Enlarge key until Full Size indicator is lit.
Enter your desired number of copies using the + key (to increase copy num- ber) or - key (to reduce copy number).
•Up to 50 copies can be entered.
•To reset the number to 1, press the Clear/ Stop key.
•When copy counter is 1, pressing the - key changes the counter to 50. Likewise, when
Press the Start key.
•To stop the machine during a
•To resume copying, press the Start key.
•To clear the copy counter, press the
Clear/Stop key.
Auto Start - Setting Copy Orders During Warm-Up
If you press the Start key during
copier will start copying when
•To cancel Auto Start, press the Clear/Stop key.