Qpe1&2
1.Photo Mode Indicator | 4.Copy Counter | |||||
| 2.Auto Image Density |
|
| 5.Start Indicator | ||
|
| Indicator |
|
| 6.Start | |
|
|
|
|
| ||
|
| Toner Indicator |
|
|
| Key |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indicators
0 Clear/Stop Key
Path Indicator
8.Image Density Adjustment Key
1.Photo Mode Indicator: Lights up when photo mode is selected with image density indicator.
(See page 28.)
2.Auto Image Density Indica- tor: Lights up to show copier is in automatic image density mode. (See page 28.)
3 . &I Replenish Toner Indicator: Replenish toner when this indica- tor lights up. (See page 42.)
4 . Copy Counter: Indicates the number of copies.
Shows reduction/enlargement size in % in zooming mode (Type 2 panel only); PE display tells you to replenish paper, and displays other data.
5.Start Indicator: Lights green when copier is ready to make copies.
6.Start Key: Press to start copy- ing.
7.Manual Image Density Indi- cators: Lights up when image density is adjusted manually. (See page 28.)
8.Image Density Adjustment Key: Used to adjust image density. (See page 28.)
9 . & Check Paper Path Indica- tor: Lights up to indicate paper jam. To clear paper misfeeds, see page 60.
10.+ and - keys: Used to increase or reduce the desired number of copies. Or type 2 only, for reduction or enlargement in 1% increments. (See page 30.)
11.Clear/Stop Key: Press to reset the counter to 1. During copy- ing, press to stop copying.
8