When there is a paper misfeed, the Check Paper Path (& ) indicator or Load Paper (PE ) indication on the copy counter will light.
A1
0
CAUTION
When removing misfed paper, do not touch the fusing unit because it could be very hot.
Do not leave any torn scraps of paper inside the copier.
After removing the misfed paper, make sure that all units are returned to their original positions and the top unit is closed.
When a paper misfeed occurs, the copier keeps track of the selected copy modes and how many copies have been completed. It is not necessary to reset the copy modes or the copy quantity after removing misfed paper.
Repeat the procedures described in this section until the Check Paper Path * indicator goes out. (The indicators do not function unless the top unit is closed.)
Do not touch the copy image when removing misfed paper - toner may stain your hands.
5 8