Ricoh 1008, FT1208 manual Power Connection, Turning Copier On

Power Connection

Only connect the copier to the power source described on the inside front cover of this manual. Avoid multi-wiring as it could cause an electric shock or fire.

Avoid using an extension cord. Make sure the wall outlet is near the copier and freely accessible so it can be unplugged easily in the event of an emergency.

•Make sure the plug is firmly inserted in the outlet.

•Voltage must not fluctuate more than 10%.

•Do not set anything on the power cord.

•Always turn the copier off when you have finished copying for the day.

..........................i

Firmly insert the plug into the copier and outlet.

Turning Copier On

Turn the main switch on.

Wait for the copier to warm up. During warm-up, the Start indica- tor lights red.

When the Start indicator turns green, the copier is ready to make copies.

•If Load Paper “PE ” indication is on when starting, load paper.