Ricoh PRIPORT VT2130 manual DO’S and DON’TS, Operating Cautions, General Cautions

Page 13

DO’S AND DON’TS

- Operating Cautions -

1.While Printing :

-Do not turn off the main switch.

-Do not unplug the power cord.

-Do not open the front cover.

-Do not move the machine.

2.Keep corrosive liquids, such as acid, off the machine.

3.Do not allow paper clips, staples, or other small objects to fall inside the machine.

4.Always turn the machine off when you have finished printing for the day.

5.Do not touch print paper if your fingers are wet or oily; fingerprints may appear on prints.

- General Cautions -

1.Do not modify or replace any parts other than the ones specified in this manual.

2.When the machine will not be used for long periods, disconnect the power cord.

3.If the machine must be transported by vehicle, please contact your dealer.

4.Do not operate the machine with any covers off.

Image 13

Contents Iiigom Page Introduction Table of Contents Machine Exterior Guide to ComponentsPage Machine Interior Ii= \Cover PlatetableButtonmaster OQ0000 Operation PanelPage Machine Environment Installation RequirementsPower Connection Access to MachineOperating Cautions DO’S and DON’TSGeneral Cautions You can use the following type of originals Thickness OriginalsMax Min OriginalswithIii Printing Paper Avoid using the foliowing kindsPrint Size MinMaxMinPreparation for Printing OperationOpen the paper Open the paper delivery table Turn on the main switchLift the paper delivery side plates Image Mode keys Setting the OriginalsSelect the image mode using Printina Enter the number of prints required using the Number keysPress the Master Making key Press the Print Start keyRestoring Paper Feed and Paper Delivery Tabies Slide in the paper delivery table Turn off the main switchRemove the paper from the paper feed table Left Image Position key Adjusting the Image PositionShifting the image position backward PressPress the Lower Paper Feed Table Shifting the image to the rightShifting the image to the left Press the Lower Paper Feed Table keyChanging the Paper Size So bxPrinting on thin paper Printing on Thick or Thin PaperPush down the feed roller pressure lever Set the side pads Move the side pad levers to the rightPostcard size original Printing on Postcard Size PaperPlace the postcard sized paper on Place Postcard Size Paper on FeedOpen the original table Various Originals9o sheets/rein issd@d a@OrnatiCallY Changing the Printing SpeedPress the Speed key. To increase To Stop the Machine During a Printing Run Open the front door Changing the Drum Unit for Color PrintingPage Printing in Two Colors Special Functions Set using the Number keysGroup Printing from the Same Original Press the Memory keySet the original face down on Press the Memory key again. The Memory returns to MemoryFor Example Combine 2 Oriainals81/2 93%Press the Combine 2 Originals key Press Various Run Lengths Using the Same MasterMaster Making Key. CheckOriginal Photo mode Line mode Photo Mode PrintingLoadina Pa~er Replenishing SuppliesPress the Lower Paper Feed Table key Supplying Ink Open the original table Master Roll ReplacementPage Thermal Head Cleaning MaintenanceClean the thermal head when 2 master rolls have been used Rli Platen Cover / Exposure GlassPlaten Cover / Exposure Glass Indicators TroubleshootingRemove the jammed master and pressthe Resetkey. Seepage Check the misfeed or malfunction locationPrevent Original misfeeds When the Misfeed ~ Indicator LightsCopy To prevent paper feed jams Page Page Difficult to remov~ th’e paper from the paper feed section When the misfed ~a~er is underneath the drumPage When the Supply/Exchange fi Indicator Lights Incomplete master eject box No master eject box Installation When the master eject box is full, do the followingOther Indicators Light Poor Printina Original Operating Cautions ImiscellaneousPage Power Source SPECIFICATION1Power Consumption Dimensions W Xdxh Storing 735 x 607 x 569 mm 28.9 23.9x 22.4 InchesOptional Equipment Consumables Name Priport Master Kg 220.4 lb120V version Size Remarks