Ricoh PRIPORT VT2130 manual Kg 220.4 lb, Optional Equipment Consumables Name Priport Master

Page 60

Optional Equipment:

Consumables:

Name

Priport Master

Vr-s

Priport Ink-Black

Priport Ink-Red

Priport Ink-Blue

Priport Ink-Green

Priport Ink-Brown

Thermal head

Cleaner

120V version:

100 kg (220.4 lb)

Color drum unit type VT2000-LG (red, blue, green, and brown) Key counter

Tape marker type 20

Size

 

Remarks

125m(41 O ft)/roll

250

masters

can be made

2 Rolls/case

per

one roll.

 

 

 

Storage:

 

 

 

0- 40°c, 10- 95$ZORH

500 cc/pack

 

 

 

5 packsl

case

 

 

 

500 cc/

pack

Environmental

conditions:

5 packslcase

10- 25°C, 20- 90YoRH

500 cclpack

Storage:

 

5 packs/case

5- 40°c, 10- 95YORH

 

 

‘1

 

 

500cc/pack

5packslcase

500cc/pack

5packs/case

Cleaner pen -1 pc Clean the thermal head

Replacement Felt using the cleaner when 2 -1 Opts master rolls have been

Cleaner Bottle -1 PC used.

For good print quality, Ricoh recommends that you use genuine Ricoh ink and master,

Specifications are subject to change without notice.

Ricoh shall not be responsible for any damage or expense that may result from the use of parts other than genuine Ricoh parts in your Ricoh office product.

Image 60
Contents Iiigom Page Introduction Table of Contents Guide to Components Machine ExteriorPage Ii= \ Machine InteriorPlatetable CoverButtonmaster Operation Panel OQ0000Page Installation Requirements Machine EnvironmentAccess to Machine Power ConnectionDO’S and DON’TS Operating CautionsGeneral Cautions Originals You can use the following type of originals ThicknessMax Min OriginalswithIii Avoid using the foliowing kinds Printing PaperPrint Size MinMaxMinOperation Preparation for PrintingOpen the paper Turn on the main switch Open the paper delivery tableLift the paper delivery side plates Setting the Originals Image Mode keysSelect the image mode using Enter the number of prints required using the Number keys PrintinaPress the Master Making key Press the Print Start keySlide in the paper delivery table Turn off the main switch Restoring Paper Feed and Paper Delivery TabiesRemove the paper from the paper feed table Adjusting the Image Position Left Image Position keyShifting the image position backward PressShifting the image to the right Press the Lower Paper Feed TableShifting the image to the left Press the Lower Paper Feed Table keySo bx Changing the Paper SizePrinting on Thick or Thin Paper Printing on thin paperPush down the feed roller pressure lever Set the side pads Move the side pad levers to the rightPrinting on Postcard Size Paper Postcard size originalPlace the postcard sized paper on Place Postcard Size Paper on FeedVarious Originals Open the original tableChanging the Printing Speed 9o sheets/rein issd@d a@OrnatiCallYPress the Speed key. To increase To Stop the Machine During a Printing Run Changing the Drum Unit for Color Printing Open the front doorPage Printing in Two Colors Set using the Number keys Special FunctionsGroup Printing from the Same Original Press the Memory keyPress the Memory key again. The Memory returns to Memory Set the original face down onCombine 2 Oriainals For Example81/2 93%Press the Combine 2 Originals key Various Run Lengths Using the Same Master PressMaster Making Key. CheckPhoto Mode Printing Original Photo mode Line modeReplenishing Supplies Loadina Pa~erPress the Lower Paper Feed Table key Supplying Ink Master Roll Replacement Open the original tablePage Maintenance Thermal Head CleaningClean the thermal head when 2 master rolls have been used Platen Cover / Exposure Glass RliPlaten Cover / Exposure Glass Troubleshooting IndicatorsRemove the jammed master and pressthe Resetkey. Seepage Check the misfeed or malfunction locationWhen the Misfeed ~ Indicator Lights Prevent Original misfeedsCopy To prevent paper feed jams Page Page When the misfed ~a~er is underneath the drum Difficult to remov~ th’e paper from the paper feed sectionPage When the Supply/Exchange fi Indicator Lights When the master eject box is full, do the following Incomplete master eject box No master eject box InstallationOther Indicators Light Poor Printina Original Imiscellaneous Operating CautionsPage SPECIFICATION1 Power SourcePower Consumption Dimensions W Xdxh Storing 735 x 607 x 569 mm 28.9 23.9x 22.4 InchesKg 220.4 lb Optional Equipment Consumables Name Priport Master120V version Size Remarks