Ricoh PRIPORT VT2130 manual To prevent paper feed jams

Page 47

When a sheet	of paper is misfed:		When two or more sheets are
			misfed:
1	1. Remove the misfed	-1	1. Remove the misfed
	paper.		sheets.

If the feed roller pres- sure lever is in the standard position, set it in the thick paper position.

3.Release the side plate pads.

4.If the separation roller pressure lever is in the standard position, move it to the thick paper position.

5.Press the Reset key.

6.Press the Print Start key.

2.If the feed roller pressure lever is in the thick paper posi- tion set it in the standard position.

3.If the pad levers are positioned to the left, move them to the right.

4.If the separation roller pressure lever is in the thick paper position, move it to the standard posi- tion.

5.Press the Reset key.

6.Press the Print Start key.

To prevent paper feed jams:

● Curled paper. +	Correct the curl.	, Paper edges	~	Shuffle the paper
		stuck together

. Post card and	Set the printing speed
thick paper.	+ slower than step 3.
	(See page 25.)

Image 47

Contents Iiigom Page Introduction Table of Contents Machine Exterior Guide to ComponentsPage Machine Interior Ii= \Buttonmaster PlatetableCover OQ0000 Operation PanelPage Machine Environment Installation RequirementsPower Connection Access to MachineGeneral Cautions DO’S and DON’TSOperating Cautions Originalswith OriginalsYou can use the following type of originals Thickness Max MinIii MinMaxMin Avoid using the foliowing kindsPrinting Paper Print SizeOpen the paper OperationPreparation for Printing Lift the paper delivery side plates Turn on the main switchOpen the paper delivery table Select the image mode using Setting the OriginalsImage Mode keys Press the Print Start key Enter the number of prints required using the Number keysPrintina Press the Master Making keyRemove the paper from the paper feed table Slide in the paper delivery table Turn off the main switchRestoring Paper Feed and Paper Delivery Tabies Press Adjusting the Image PositionLeft Image Position key Shifting the image position backwardPress the Lower Paper Feed Table key Shifting the image to the rightPress the Lower Paper Feed Table Shifting the image to the leftChanging the Paper Size So bxSet the side pads Move the side pad levers to the right Printing on Thick or Thin PaperPrinting on thin paper Push down the feed roller pressure leverPlace Postcard Size Paper on Feed Printing on Postcard Size PaperPostcard size original Place the postcard sized paper onOpen the original table Various OriginalsPress the Speed key. To increase Changing the Printing Speed9o sheets/rein issd@d a@OrnatiCallY To Stop the Machine During a Printing Run Open the front door Changing the Drum Unit for Color PrintingPage Printing in Two Colors Press the Memory key Set using the Number keysSpecial Functions Group Printing from the Same OriginalSet the original face down on Press the Memory key again. The Memory returns to Memory93% Combine 2 OriainalsFor Example 81/2Press the Combine 2 Originals key Key. Check Various Run Lengths Using the Same MasterPress Master MakingOriginal Photo mode Line mode Photo Mode PrintingPress the Lower Paper Feed Table key Replenishing SuppliesLoadina Pa~er Supplying Ink Open the original table Master Roll ReplacementPage Clean the thermal head when 2 master rolls have been used MaintenanceThermal Head Cleaning Platen Cover / Exposure Glass Platen Cover / Exposure GlassRli Check the misfeed or malfunction location TroubleshootingIndicators Remove the jammed master and pressthe Resetkey. SeepageCopy When the Misfeed ~ Indicator LightsPrevent Original misfeeds To prevent paper feed jams Page Page Difficult to remov~ th’e paper from the paper feed section When the misfed ~a~er is underneath the drumPage When the Supply/Exchange fi Indicator Lights Incomplete master eject box No master eject box Installation When the master eject box is full, do the followingOther Indicators Light Poor Printina Original Operating Cautions ImiscellaneousPage Storing 735 x 607 x 569 mm 28.9 23.9x 22.4 Inches SPECIFICATION1Power Source Power Consumption Dimensions W XdxhSize Remarks Kg 220.4 lbOptional Equipment Consumables Name Priport Master 120V version