Ricoh PRIPORT VT2130 manual Introduction

Page 3

INTRODUCTION

The Ricoh Priport VT2130 is a stencil duplicator which is carefully manufactured to exacting standards of high performance.

This manual contains detailed instructions on the operation and care of the Priport VT21 30. To get the maximum versatility from this machine, all operators should read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.

1.Wide range of reproduction ratios:

4 fixed reproduction ratios (100% plus 3 reduction ratios).

2.2 single originals can be printed on one sheet of paper.

3.5 mono color printing with optional drum units.

Image 3

Contents Iiigom Page Introduction Table of Contents Machine Exterior Guide to ComponentsPage Machine Interior Ii= \Platetable CoverButtonmaster OQ0000 Operation PanelPage Machine Environment Installation RequirementsPower Connection Access to MachineDO’S and DON’TS Operating CautionsGeneral Cautions Originalswith OriginalsYou can use the following type of originals Thickness Max MinIii MinMaxMin Avoid using the foliowing kindsPrinting Paper Print SizeOperation Preparation for PrintingOpen the paper Turn on the main switch Open the paper delivery tableLift the paper delivery side plates Setting the Originals Image Mode keysSelect the image mode using Press the Print Start key Enter the number of prints required using the Number keysPrintina Press the Master Making keySlide in the paper delivery table Turn off the main switch Restoring Paper Feed and Paper Delivery TabiesRemove the paper from the paper feed table Press Adjusting the Image PositionLeft Image Position key Shifting the image position backwardPress the Lower Paper Feed Table key Shifting the image to the rightPress the Lower Paper Feed Table Shifting the image to the leftChanging the Paper Size So bxSet the side pads Move the side pad levers to the right Printing on Thick or Thin PaperPrinting on thin paper Push down the feed roller pressure leverPlace Postcard Size Paper on Feed Printing on Postcard Size PaperPostcard size original Place the postcard sized paper onOpen the original table Various OriginalsChanging the Printing Speed 9o sheets/rein issd@d a@OrnatiCallYPress the Speed key. To increase To Stop the Machine During a Printing Run Open the front door Changing the Drum Unit for Color PrintingPage Printing in Two Colors Press the Memory key Set using the Number keysSpecial Functions Group Printing from the Same OriginalSet the original face down on Press the Memory key again. The Memory returns to Memory93% Combine 2 OriainalsFor Example 81/2Press the Combine 2 Originals key Key. Check Various Run Lengths Using the Same MasterPress Master MakingOriginal Photo mode Line mode Photo Mode PrintingReplenishing Supplies Loadina Pa~erPress the Lower Paper Feed Table key Supplying Ink Open the original table Master Roll ReplacementPage Maintenance Thermal Head CleaningClean the thermal head when 2 master rolls have been used Platen Cover / Exposure Glass RliPlaten Cover / Exposure Glass Check the misfeed or malfunction location TroubleshootingIndicators Remove the jammed master and pressthe Resetkey. SeepageWhen the Misfeed ~ Indicator Lights Prevent Original misfeedsCopy To prevent paper feed jams Page Page Difficult to remov~ th’e paper from the paper feed section When the misfed ~a~er is underneath the drumPage When the Supply/Exchange fi Indicator Lights Incomplete master eject box No master eject box Installation When the master eject box is full, do the followingOther Indicators Light Poor Printina Original Operating Cautions ImiscellaneousPage Storing 735 x 607 x 569 mm 28.9 23.9x 22.4 Inches SPECIFICATION1Power Source Power Consumption Dimensions W XdxhSize Remarks Kg 220.4 lbOptional Equipment Consumables Name Priport Master 120V version